Table of Contents
Advertisement
Chapter 3: Accommodating Other Tubing Sizes
k. Unscrew the set-screw holding the top of the inner bearing in the housing and remove it from the
groove in which it is captured.
l.
Slide (in a circular motion) the bottom half of the inner bearing out of its groove to free it from the
bottom half of the oiler housing.
3. Rebuild the oiler assembly in reverse order from the dismantling process described above, using
appropriate alternate-tubing-size parts.
42
NOV CTES
Argus TubeSpec User Guide
Hide quick links:
Advertisement
Table of Contents
