Lube Tank Kit Maintenance And Safety Practices - Argus TubeSpec User Manual

Coiled tubing inspection system
Table of Contents

Advertisement

Chapter 2: Overview of the Argus TubeSpec System
Two oiler hoses run from the lube tank to the measuring head. These hoses move lubricating oil from the
lube tank to the TubeSpec's oiler assemblies for packer lubrication. The hoses can be comprised of 3/8" ID
hose (please adhere to the ratings indicated in Appendix B).
The air-regulator valve requires that a hose connect the air-supply source to the open fitting shown in the
figure Lube Tank: Fill-side View. The air-source rating is dependent on the air-supply requirements for the
location; the supply can be regulated manually for tank use.

Lube Tank Kit Maintenance and Safety Practices

Inspect the lube tank kit monthly for signs of corrosion and for physical damage to the tank, as well as to
all accessories.
Also, monthly inspect the oil return filter bag (see item #5 in Parts for Lube Tank Kit (Including Pneumatic
Pump) ). Empty sand, dirt, and rust particles from the filter; then clean the filter with a standard detergent.
If the filter is damaged by punctures or tears, it should be replaced. Inspect the contents of the tank while
the filter panel is off. If there is an excess of water or a build-up of algae, drain the oil and clean the inside
of the tank to remove the algae. When all water and algae have been removed, the tank can be refilled with
clean oil.
Also on a monthly basis, check the inline air lubricator for the presence of oil (see item #7 in Parts for Lube
Tank Kit (Including Pneumatic Pump) ). Replace, or add 10W-30 oil to the container only when adhering
to the disconnect warning below. Additionally, regularly drain the primary inline filter (item #12) of all
water.
Replace all labels, including warning and identification labels, if they become illegible and/or unclear.
Ensure that the pressure source is disconnected and that pressure is carefully
discharged from the pump before removing any part of the pump for maintenance purposes.
32
NOV CTES
Argus TubeSpec User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents