Argus TubeSpec User Manual page 18

Chapter 2: Overview of the Argus TubeSpec System
Table 2-2 Measuring-head Figure Sections
Section
Section 1
Section 2
Section 3
Section 4
Section 1
10
Description
Shows the UT-sensor ring with all components
ejected. At the center of this exploded view is the
packer and the UHMW polyethylene tubing guide-
rings. The packer and the white-polyethylene tub-
ing guides can be switched out if the operator
desires to replace the existing tubing with tubing of
another available size. See Tubing Sizes for Argus
TubeSpec Model Numbers for more information.
Shows the piston manifold that drives the end
plates to compress the packers. This creates cou-
pling between the tubing and the UT sensors.
Provides the conduit through which all electrical
connectors pass, and a mounting point for the fluid
pressure line.
Shows the proximity probe that provides the diam-
eter reading.
NOV CTES Argus TubeSpec User Guide