The Tubespec Packer Pressure-Control System - Argus TubeSpec User Manual

Chapter 2: Overview of the Argus TubeSpec System
Item Quan-
tity
27 1
28 3
29 1
30 1
31 2
32 8
33 2
34 2
35 2
36 2
37 2
38 2
39 2
40 6
41 2
42 2
43 2
44 2
45 4
46 2
47 2
48 1
49 3
50 1

The TubeSpec Packer Pressure-control System

A packer pressure-control system resides within the TubeSpec system for the purpose of maintaining
proper coupling between the tubing and the UT sensors.
The system allows the user to set and maintain the desired packer pressure as conditions at the measuring
head change. As tubing of varying sizes and shapes is introduced to the system, and as the packers wear,
regulated hydraulic pressure is applied to the pistons to actuate (move) them into position to generate ade-
quate force to sufficiently compress the packers to create coupling.
14
Part Number Description
66B-7190-0008-70 Swagelok Fitting Straight 1/8"NPT 1/4"
tube
66B-7190-0008-69 Swagelok Elbow Fitting 90 Degree
66B-7190-0008-54 ¼" NPT Male to Female Elbow 45 degree
66B-7190-0008-53 ¼" NPT Hex nipple
66B-7100-1008-50-C Mounting Post
66B-7190-0008-73 Side Rail Bolt 1" 3/8-16
66B-7100-1009-34 Lemo Connector Housing Cover
66B-7190-0008-52 Lemo Connector Housing Cover O-ring
66B-7100-1009-76 Lemo Connector Housing W / label
66B-7190-0009-36 Lemo Connector (Socket)
66B-7190-0009-34 Recp. Dust Cover
66B-7190-0001-43 Screw pan head 6-32 X ¼"
66B-7100-0008-51 Proximity Sensor Ring
66B-7190-0008-51 Flat point set screws 4-40
66B-7100-1003-07 Prox Probe Spring
66B-7190-0008-64 Proximity Sensors
66B-7100-0008-62 Proximity Probe Bracket Assembly
66B-7190-0008-50 SHCS 10-24 ¾" long, ss
66B-7190-0008-49 SHCS ¼-20 1-3/4" long, ss
66B-7190-0008-48 30mm Locking nut for Proximity Probe
66B-7190-0008-68 Short Braided Flex Hydraulic Hose 6"
66B-7190-0008-29 Coupler Quick Disconnect
66B-7190-0009-49 Fitting 1/8" X 1/8" Pipe Sz, Adapter
66B-7190-0008-47 1/4" tube to 1/8" NPT Elbow 45 deg
NOV CTES Argus TubeSpec User Guide