Specifications - Malaguti SPIDER MAX RS 500 Service Manual

SPECIFICATIONS

F. 1
DIMENSIONS
Wheel base (A) m ....................................................................................... 1,490
Max. length (B) m ........................................................................................ 2,200
Max. width (C) m ......................................................................................... 0,930
Max. height (D) m ........................................................................................ 1,470
Kerb weight kg ............................................................................................... 230
Max. load with rider, passenger and luggage kg .............................................. 180
CAPACITY
Engine oil cm3 ........................................................................................... 1700*
Transmission oil cm3 ................................................................................... 250*
Fuel tank (total) .............................................................................................. 14*
ENGINE: single-cylinder, four-valve
Valves type ............................................................................. PIAGGIO M34CM
n° Cylinders ...................................................................................................... 1
Bore x stroke mm .................................................................................. Ø 94x71
Capacity cm3 ................................................................................................. 493
Compression ratio ............................................................................... 10.5 ± 0.5
Cooling ........................................................................................................ liquid
Starting system ............................................................................ electric starter
Greasing system .................................................................................. wet sump
SPARK PLUGS
Type .............................................................................................. NGK CR7EKB
TRANSMISSION
Automatic speed variator with expandable pulleys, V-belt, automatic
dry centrifuge clutch, reduction gear and transmission
compartment with forced circulation cooling system.
FUEL SYSTEM
Electronic injection with electrical fuel pump.
Fuel: unleaded petrol.
ELECTRONIC IGNITION
High efficiency, inductive type coupled with the injection system,
variable advance and separate HV coil.
BRAKES
The braking system is hydraulically operated and features double front disc (2
discs with a diam. of 270 mm) and rear disc (260 mm diam. disc) with braking
distribution system. The brakes are operated as follows:
Left lever: rear lever + front lever (right hand side of the vehicle)
Right lever: front brake (left hand side of the vehicle)
CHASSIS
"V-Box" type, composed of a double pressure die cast shell made of aluminium,
coupled, on the front and rear sides, to a steel pipe frame.
SUSPENSIONS
Front: hydraulically controlled fork with two Ø 41 mm rods.
Stroke: 120 mm
Rear: 2 hydraulic shock absorbers with adjustable preloading spring.
BATTERY
12V, 14Ah, maintenance-free.
TIRES
Front: 120/80 - 16
Rear: 150/70 - 16
7 02/08
60 S
68 S
* Indicative Value