370XA Gas Chromatograph
APRIL 2014
2.
3.
4.
Maneuver the GC to insert the two top bolts into the eyelets of
the mounting bracket and allow the bolts to drop down and hold
the GC loosely on the bracket.
Screw in the two bottom bolts through the mounting bracket
with the washers on. The flat washer should be against the
bracket, and the spring washer between the flat washer and
the bolt head. Hand tighten these two bolts so that they secure
the GC in place.
One at a time, remove the top bolts, put on the washers, and
screw the bolts into the back of the GC and hand tighten.
System Reference Manual
7P00370-H01
3 - 15