370XA Gas Chromatograph
APRIL 2014
3.11.2
Ethernet port 2
The second Ethernet port is intended to be connected to an Ethernet-
enabled supervisory network such as a flow computer, SCADA
system, or DCS. This port can also be used to permanently connect to
a maintenance network with MON2020.
Since this port is intended for connection to hard wired Ethernet
networks, the IP address, the subnet, and the gateway address is
intended to be configured appropriately for the network it is being
connected to. Consult with your network administrator for the required
settings.
System Reference Manual
7P00370-H01
3 - 39