Section 5 Replacing The Maintainable Module; Remove The Maintainable Module - Emerson Rosemount 370XA System Reference Manual

Section 5: Replacing the maintainable module
5.1

Remove the maintainable module

Tools required:
1.
2.
3.
4.
A 2 mm hex or allen wrench
A 4 mm hex or allen wrench
Remove power from the GC.
Turn off the sample gas(es) at the isolation valve(s) in the
external sample system that is closest to the GC.
Turn off the calibration gas at the isolation valve closest to the
GC.
Turn off the carrier and actuation gases at the isolation valve
closest to the GC.
5 - 1