Remote Programming With Mct 10 Set-Up Software - Danfoss VLT AutomationDrive Operating Instructions Manual

About Frequency Converter P...
5.6 Remote Programming with MCT 10 Set-
up Software
Danfoss has a software program available for developing,
storing, and transferring frequency converter programming.
The MCT 10 Set-up Software allows the user to connect a PC
to the frequency converter and perform live programming
rather than using the LCP. Also, all frequency converter
programming can be done off-line and simply downloaded
into frequency converter. Or the entire frequency converter
profile can be loaded onto the PC for back up storage or
analysis.
5 5
The USB connector or RS-485 terminal are available for
connecting to the frequency converter.
MCT 10 Set-up Software is available for free download at
www.VLT-software.com. A CD is also available by requesting
part number 130B1000. A user's manual provides detailed
operation instructions.
40
®
VLT AutomationDrive Operating
Instructions
®
MG.33.AJ.02 - VLT is a registered Danfoss trademark