Ending The Conference; Disconnecting The Line - Sony PCS-TL50 Operation Manual

Ending the Conference

Disconnecting the Line

1
Press the CONNECT/DISCONNECT (
Commander.
The message "Disconnect?" appears on the display.
CONNECT/
1
DISCONNECT
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
INPUT SELECT
7 8 9
FAR/NEAR
0
ALPHA/NUM
2
Press the
press the ENTER button, or press the CONNECT/DISCONNECT (
) button.
The line is disconnected and the launcher menu is restored.
To set the system to standby mode
Press the
display off, and set to standby mode?" appears. Press the
select OK, then press the ENTER button.
You can receive a call from a remote party in the standby mode.
To turn off the power
Press the
second to turn the system off, and turn off other equipment used for the
videoconference.
18
GB
Ending the Conference
2 3 4 5
MENU
PinP
BACK
SPACE
PandP
CLEAR
ENTER
SYMBOL
RETURN
B or b button on the Remote Commander to select "OK", then
@ / 1 button on the Remote Commander, and the message "Turn the
1 (power) switch on the right side of the system for more the one
/
CONNECT/
DISCONNECT
) button on the Remote
Disconnect?
OK Cancel
B or b button to
/