Remote Commander And Operation Sound Check; Video Output Check - Sony PCS-G50 Service Manual

4-3-3. Remote Commander and Operation
Sound Check
1. Connect the VIDEO IN CAMERA connector of the
unit and the camera, and turn on the power.
2. Operate the joy stick of the remote commander
towards the camera, and check if sound comes out.

4-3-4. Video Output Check

1. Connect the VIDEO IN CAMERA connector of the
unit and the camera.
2. Connect the unit's RGB OUT and VIDEO OUT AUX
connectors to the color monitor.
3. Refer to Section 4-1-1, and start the terminal software.
4. Check that the launcher menu is displayed on the color
monitor connected to the RGB OUT connector.
5. Enter the following command from the terminal PC,
and check that nothing is displayed (black monitor
display) on the color monitor connected to the RGB
OUT connector.
pcsdb> mail 36, 3a2000000100 ↓
6. Enter the following command from the terminal PC.
pcsdb> mail 36, 3a3100000200 ↓
pcsdb> set b6000014 0 ↓
7. Check that the picture on the color monitor connected
to the VIDEO OUT AUX connector is only the camera
image from the launcher menu.
8. Enter the following command from the terminal PC.
pcsdb> set b6000014 2 ↓
pcsdb> mail 36, 3a3100000100 ↓
pcsdb> mail 36, 3a2000000200 ↓
9. Check the followings.
. Color monitor connected to the RGB OUT connector:
Black monitor display → Launcher menu displayed
. Color monitor connected to the VIDEO OUT AUX
connector:
Camera image only → Launcher menu displayed
PCS-G50/G50P
4-29