Download Print this page

Programming The Device; Figure 13 Flashpro Project Configuration - Microsemi SmartFusion2 Demo Manual

Soc fpga adaptive fir filter - libero soc v11.8 sp1

Hide thumbs Also See for SmartFusion2:

Table of Contents

SmartFusion2 SoC FPGA - Adaptive FIR Filter Demo

2.6.2

Programming the Device

Figure 13 • FlashPro Project Configuration

Click PROGRAM to start programming the device. Wait until programmer status is changed to RUN

PASSED as shown in the following figure.

DG0441 Demo Guide Revision 7.0

Table of Contents

Do you have a question about the SmartFusion2 and is the answer not in the manual?