Programming The Demo Design; Figure 11 Usb To Uart Bridge Drivers For Smartfusion2 Security Evaluation Kit - Microsemi SmartFusion2 Demo Manual
Soc fpga adaptive fir filter - libero soc v11.8 sp1
Hide thumbs
Also See for SmartFusion2:
- User manual (829 pages) ,
- Demo manual (40 pages) ,
- Configuration manual (23 pages)
Table of Contents
Advertisement
SmartFusion2 SoC FPGA - Adaptive FIR Filter Demo
Figure 11 • USB to UART Bridge Drivers for SmartFusion2 Security Evaluation Kit
6.
If USB to UART bridge drivers are not installed, download and install the drivers from
www.microsemi.com/soc/documents/CDM_2.08.24_WHQL_Certified.zip.
2.6
Programming the Demo Design
The following steps describe how to program the demo design:
Download the demo design from the following links:
•
SmartFusion2 Starter Kit:
http://soc.microsemi.com/download/rsc/?f=m2s_dg0441_starter_liberov11p8_sp1_df
•
SmartFusion2 Security Evaluation Kit:
http://soc.microsemi.com/download/rsc/?f=m2s_dg0441_eval_liberov11p8_sp1_df
1.
Launch the FlashPro software.
2.
Click New Project.
3.
In the New Project window, enter the project name as SF2_Adaptive_Filter.
DG0441 Demo Guide Revision 7.0
12
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartFusion2 and is the answer not in the manual?
Questions and answers