Revision History; Revision 8.0; Revision 7.0; Revision 6.0 - Microsemi SmartFusion2 Demo Manual
Soc fpga in-system programming using uart interface - libero soc v11.8
Hide thumbs
Also See for SmartFusion2:
- User manual (829 pages) ,
- Demo manual (40 pages) ,
- Configuration manual (23 pages)
Table of Contents
Advertisement
Revision History
1
Revision History
The revision history describes the changes that were implemented in the document. The changes are
listed by revision, starting with the most current publication.
1.1
Revision 8.0
Updated the document for Libero v11.8 software release.
1.2
Revision 7.0
Updated the design files for Libero v11.6 software release (SAR 72612).
1.3
Revision 6.0
Updated the design files for Libero v11.5 software release (SAR 68427) and (SAR 68139).
1.4
Revision 5.0
Updated the document for Libero v11.5 software release (SAR 65132).
1.5
Revision 4.0
Updated the document for Libero v11.4 software release (SAR 59742).
1.6
Revision 3.0
Updated the document for Libero v11.3 software release (SAR 56619).
1.7
Revision 2.0
Updated Description section (SAR 53451).
1.8
Revision 1.0
In revision 1.0, updated the document for Libero v11.2 software release (SAR 52962).
1.9
Revision 0
Revision 0 was the first publication of this document.
DG0454 Demo Guide Revision 8.0
1
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartFusion2 and is the answer not in the manual?
Questions and answers