Importing The .Cxf File - Microsemi SmartFusion2 Demo Manual
Soc fpga in-system programming using uart interface - libero soc v11.8
Hide thumbs
Also See for SmartFusion2:
- User manual (829 pages) ,
- Demo manual (40 pages) ,
- Configuration manual (23 pages)
Table of Contents
Advertisement
Appendix: Implementing Workaround to Access Fabric LSRAM after IAP/ISP Program
Operation
8.2
Importing the .cxf File
Import the .cxf file for SmartDesign Dev_Restart_after_ISP_blk. This .cxf file is provided with the
design files and it has all the component instantiations and connections mentioned in
SmartDesign,
The following steps describe how to import .cxf file to Libero project:
1.
Choose File > Import > Others.
2.
Browse to the following Dev_Restart_after_ISP_blk.cxf file location in the design files folder.
<download_folder>\sf2_isp_using_uart_interface_demo_df\host_tool_and_samples\LSRAM_Worka
round\component\work\Dev_Restart_after_ISP_blk
3.
Browse to the following Ram_interface.v file location in the design files folder.
<download_folder>\sf2_isp_using_uart_interface_demo_df\Source_files
Repeat Step 7 and Step 8 to instantiate Dev_Restart_after_ISP_blk in demo_top SmartDesign.
page 23 from step 1 to 6.
DG0454 Demo Guide Revision 8.0
Using
28
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartFusion2 and is the answer not in the manual?