4. Commissioning
4.4
LED display of the valves
1
0
1
2
3
4
1
LED for valve location 0
2
Valve location 0
Fig. 4/2: Assignment of LED to valve location
4−12
There is a yellow LED for every valve solenoid coil. This LED
indicates the switching status of the valve solenoid coil when
the CPV−SC valve terminal is ready for operation. The LEDs are
assigned to the valve locations in numerically ascending
order. Therefore LED 0 is assigned to valve location 0, etc. The
valve locations are numbered in ascending order from left to
right (see diagram).
2
3
4
3
Valve location 3
LED for valve location 3
Festo P.BE−CPVSC−EN en 0301a