Remove Lid Switch - Maytag MAT14CS Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
• The lid switch is located under the top of
the washer. This picture shows the action
of the lid hinge and the lid switch. The
washer front does not need to be removed
to remove the lid switch.
1. Open the control panel, (See page 4-1).
2. Remove two Phillips head screws that
secure the lid switch to the washer top.

reMOve LiD SWiTCH

Lid switch
actuator tab
Lid switch
3.
Lid hinge
4-44
Two Phillips screws
5/16 inch screw
Remove the 5/16 inch hex head screw that
secures the lid switch ground wire.