Remove Clutch Assembly And Parts - Maytag MAT14CS Service Manual

reMOve CLuTCH aSSeMBLY aND ParTS

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
vespal bearing
Spring retainer
e-clip
Thrust washer
1. Remove the vespal bearing
2. Remove the thrust washer.
vespal bearing
anti rattle clip
Clutch
Thrust washer
4-54
3. Remove the E-clip with a small flat blade
screwdriver.
4. Remove the spring retainer with a small flat
blade screwdriver from under the tabs by
prying under the spring retainer.
5. Remove the clutch by sliding it up off the
agitator shaft.
Clutch
e-clip
Spring retainer