Installation Requirements; Tools And Parts - Maytag MAT14CS Service Manual

iNSTaLLaTiON reQuireMeNTS

For complete installation instructions
choose one of the links below.
Installation Instructions
Commercial Non-Coin
Top Load Washer
Installation Instructions
Commercial Coin
Top Load Washer

TOOLS aND ParTS

Gather the required tools and parts before
starting installation. Read and follow the
instructions provided with any tools listed
here.
Tools needed:
• Level
• Utility knife
• Scissors
• 8" or 10" adjustable wrench
• Flat-blade screwdriver
• Pliers
• Bucket
Parts supplied:
Remove parts bag from washer. Check that all
parts were included.
• 2 inlet hoses
• 4 flat water hose washers
• 2 front-leveling legs with locking nuts
• 1 drain hose
• 1 hose clamp
• 1 service access door locking cam
• PR units only: 1 Bezel Kit includes Bezel,
Harness wire.
• CS units only: 1 coin slide extension and 2
mounting screws.
NOTe: Coin slide security bolt not supplied.
2-1