Remove Tub Support Spring And Bracket - Maytag MAT14CS Service Manual

reMOve TuB SuPPOrT SPriNG aND BraCkeT

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Remove the cabinet front (see page 4-16).
2. Remove the spring support bracket by
taking out the 1/4 inch hex head screw (see
page 4-29 step 9).
3. Lift the hook of the spring out of the support
bracket.
4.
5.
Spring hook
4-36
Push the tub support spring bracket from
the front.
Remove it from the back of the tub support
slot.
Bracket