P971 Eeprom Transfer; R980 List Of Existing Parameter Numbers, Start; R990 List Of Modified Parameter Numbers, Start - Siemens 6RA70 Series Instructions Manual

PNU Description
P971 EEPROM transfer
*
Transfer of parameter values from RAM to EERPROM on switchover from 0
to 1.
It takes approximately 15s to process all values. The PMU remains in value
mode for this period.
r980 List of existing parameter numbers, start
Visualization parameter for displaying the first 100 parameter numbers in
the P or r parameter range (0 to 999). The parameter numbers are listed in
ascending sequence.
Repetition of a number over several indices means that there are no further
parameter numbers in the 0 to 999 range.
The list is continued at the parameter whose number is displayed under
index 101.
See also r989
r981 List of existing parameter numbers, continuation
See r980.
r982 List of existing parameter numbers, continuation
See r980.
r983 List of existing parameter numbers, continuation
See r980.
r984 List of existing parameter numbers, continuation
See r980.
r985 List of existing parameter numbers, continuation
See r980.
r986 List of existing parameter numbers, continuation
See r980.
r987 List of existing parameter numbers, continuation
See r980.
r988 List of existing parameter numbers, continuation
See r980.
r989 List of existing parameter numbers, continuation
Continuation of the list can be found under index 101. Please note:
860 = r860 (TECH BOARD installed)
2980 = n980
See also r980.
r990 List of modified parameter numbers, start
Visualization parameter for displaying the first 100 modified parameters in
the P or r parameter range (0 to 999). The parameter numbers are listed in
ascending sequence.
Repetition of a number over several indices means that there are no further
modified parameters in the 0 to 999 range.
The list is continued at the parameter whose number is displayed under
index 101.
See also r999.
r991 List of modified parameter numbers, continuation
See r990.
r992 List of modified parameter numbers, continuation
See r990.
r993 List of modified parameter numbers, continuation
See r990.
r994 List of modified parameter numbers, continuation
See r990.
r995 List of modified parameter numbers, continuation
See r990.
r996 List of modified parameter numbers, continuation
See r990.
10-92
Value range
[Unit]
Steps
0 to 1
1
SIEMENS Energy & Automation
SIMOREG DC Master Base Drive Panel Operating Instructions
No. indices See
Factory Change
setting (Access /
Type Status)
Ind: None P052 = 3
FS=0 P051 = 40
Type: O2 Offline
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2
Ind: 101 P052 = 3
Type: O2