Table of Contents
Advertisement
3.3
Option Part Numbers
Options
Terminal expansion card (CUD2)
User-friendly operator control panel (OP1S)
AOP1 adapter for mounting OP1A in cubicle door, including
5 m connecting cable
PMU-OP1S connecting cable, 3m
PMU-OP1S connecting cable, 5m
LBA
Local bus adapter for the electronics box
Note: LBA is needed to install any boards listed below
ADB Adapter board
Note: ADB is always needed to install CBC, CBP2, CBD,
EB1, EB2, SBP and SLB boards
SBP Pulse encoder evaluation board
EB1
Terminal expansion board
EB2
Terminal expansion board
SLB
SIMOLINK board
CBP2 Communications board interface for PROFIBUS
CBC Communications board interface for CAN protocol
CBD Communications board interface for DeviceNet protocol
T400 Technology board with SPW 420 Axial winder software
T400 Technology board with SPW 440 Angular Synchr. Software
1) A pulse encoder evaluation circuit is a standard component of the basic SIMOREG converter. The SBP only
needs to be ordered in configurations requiring evaluation of a second pulse encoder.
2) The LBA local bus adapter and ADB adapter board must be ordered as additional components for installing
supplementary boards in the SIMOREG converter.
Siemens Energy & Automation
SIMOREG DC Master Base Drive Panel Operating Instructions
1) 2)
2)
2)
2)
Order No.
6RX1700-0AK00
6SE7090-0XX84-2FK0
6SX7010-0AA00
6SX7010-0AB03
6SX7010-0AB05
6SE7090-0XX84-4HA0
6SE7090-0XX84-0KA0
6SX7010-0FA00
6SX7010-0KB00
6SX7010-0KC00
6SX7010-0FJ00
2)
6SX7010-0FF05
2)
6SX7010-0FG00
2)
6SX7010-0FK00
6DD1-842-0AA0
2)
6DD1-842-0ABO
2)
3-3
Advertisement
Table of Contents
