Combination Possibilities; Combination With An Osseointegrated Implant System - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

Product description
• Stability while standing and walking
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking speeds

2.3 Combination possibilities

This product can be combined with the following Ottobock components:
Adapters
• 4R104=60 double adapter, sliding
• Rotation adapter: 4R57, 4R57=*
• 4R41 lamination anchor with pyramid receiver
• 4R111 lamination anchor with pyramid receiver
• 4R89 lamination anchor with pyramid adapter
• 4R116 lamination anchor with pyramid adapter
Tube adapter
• 2R57 tube adapter
• 2R67 tube adapter with torsion unit
Cosmetic cover/protector
• Foam cover: 3S26
• 4X860=* C-Leg Protective Cover (w/o shield)
Prosthetic feet
The maximum allowable patient weight depends on the foot size.
• 1D10 Dynamic foot
• 1D11 Dynamic foot (women)
• 1M10 Adjust
• 1C10 Terion
• Terion K2: 1C11
• 1A30 Greissinger plus
• 1C30 Trias
• 1D35 Dynamic Motion
• 1C40 C-Walk
• Meridium: 1B1-2
• 1C66 Triton smart ankle
Depending on the patient's weight, this knee joint may be combined with the prosthetic feet from the Triton
range (1C60 through 1C66) and the 1B1 Meridium and 1B1-2 Meridium prosthetic feet in the following foot
sizes only (see table).
Please contact Ottobock customer service if you would like a combination outside the approved ranges.
Body weight
up to 100 kg (up to 220 lbs)
101 kg to 125 kg (221 lbs to 275 lbs)
(not permitted for 1B1 and 1B1-2)
126 kg to 136 kg (276 lbs to 300 lbs)
(not permitted for 1C63, 1C66)

2.3.1 Combination with an osseointegrated implant system

This product can be connected to a socket or to an osseointegrated, percutaneous implant system.
In case of connection to an implant system, verify that the manufacturer of the implant system and the manufactur­
ers of the corresponding exoprosthetic components/adapters also permit this combination. It must be ensured that
all indications/contraindications, the field of application, the conditions of use and all safety instructions are com­
plied with for the implant system, corresponding exoprosthetic components, corresponding adapters and for the
knee joint.
Among other things, this relates to the body weight, mobility grade, type of activity, load capacity of the implant and
bone anchoring, freedom from pain under functional load and compliance with the permissible ambient conditions
(see Page 39).
8
• 4R104=75 double adapter, sliding
• 4R43 lamination anchor with threaded connector
• 4R111=N lamination anchor with threaded connect­
or
• 4R40 torsion adapter
• 4R118 adapter plate
• 1C60 Triton
• 1C61 Triton Vertical Shock
• 1C62 Triton Harmony
• 1C63 Triton Low Profile
• 1C64 Triton Heavy Duty
• 1E56 Axtion
• 1E57 Lo Rider
• 1B1 Meridium
Approved foot size [cm]
21 to 30
(24 to 29 with 1B1, 1B1-2)
up to 28
(up to 26 for 1C63 and 1C66)
up to 26
C-Leg 3C98-3/3C88-3