Remote Management Port Card (Optional) - Dell DSS 2500 Owner's Manual

Figure 50. Installing full height and full length expansion card into the dual riser module
1 dual riser module
3 expansion card retention latch
Next steps
1 Install the expansion card riser.
2 If disconnected, connect the required power or data cables to the expansion card.
3 If required, press the expansion card latch on the cooling shroud to support the full length expansion card.
4 Follow the procedure listed in the After working inside your system section.
5 Install any device drivers required for the expansion card as described in the documentation for the card.
Related links
Safety instructions
Before working inside your system
Removing the dual riser module (optional)
Removing the internal PERC riser
Removing an expansion card from the dual riser module
Installing the internal PERC riser
Installing the dual riser module (optional)
After working inside your system

Remote management port card (optional)

The remote management port card is used for advanced management of the system.
2 full height and full length expansion card
4 full height and full length expansion card latch (on
cooling shroud)
Installing and removing system components 107