Viewing System Setup; System Setup Details; System Bios - Dell DSS 2500 Owner's Manual

Viewing System Setup

To view the System Setup screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
Related links
System Setup

System Setup details

System Setup details
The System Setup Main Menu screen details are explained as follows:
Option Description

System BIOS

Enables you to configure BIOS settings.
iDRAC Settings Enables you to configure BMC settings.
The iDRAC settings utility is an interface to set up and configure the BMC parameters by using UEFI. You can
enable or disable various BMC parameters by using the iDRAC settings utility. For more information about this
utility, see Integrated Dell Remote Access Controller 8 User's Guide at Dell.com/idracmanuals.
Device Settings Enables you to configure device settings.
Related links
System Setup
iDRAC Settings utility
Device Settings
Viewing System Setup
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, set the RAID mode,
and enable or disable USB ports.
30 Pre-operating system management applications