Table of Contents
Advertisement
Figure 79. Screw location on the system board
1
screw (9)
Next steps
1
Install or connect the following components:
a
internal PERC riser card
b
the expansion card riser(s)
c
heat sink(s) or heat-sink blank(s)
d
processors(s) or processor blank(s)
e
memory modules and memory module blanks
f
cooling fans
g
cooling shroud
h
power supply unit(s)
2
Reconnect all cables to the system board.
NOTE:
Ensure that the cables inside the system are routed along the chassis wall .
3
Follow the procedure listed in the After working inside your system section.
4
Ensure that you:
a
Use the Easy Restore feature to restore the service tag.
b
Update the BIOS and iDRAC versions.
146
Installing and removing system components
2
system identification button
Advertisement
Table of Contents
Troubleshooting
