Moving Around The Display; Moving Between Fields; Inserting Text; Deleting Text - Sharp Zaurus ZR-5700 Operation Manual

Moving around the display

When working in an entry, the easiest way to move
the cursor on the display is to touch the location
with the touch pen. The cursor will immediately
move to the selected position. You can also move
the cursor around the display with the cursor keys:
, , , . This may sometimes be more conven-
ient when you are working from the keyboard. For
rapid cursor movement, hold the cursor key down.
Advanced cursor key combinations are also
available:
2nd Move the cursor to the beginning of a line.
2nd Move the cursor to the end of a line.
2nd Move the cursor to the top of a field (or
bottom of the previous field if already on
the first line).
2nd Moves the cursor to the bottom of the field
(or top of the next field if already on the
last line).

Moving between fields

You can move the cursor directly to the next field in
an entry by touching the desired field name on the
display, or by pressing
cursor moves to the beginning of the desired field.

Inserting text

To insert new text in the middle of existing text,
move the cursor to the correct position and begin
typing. Text is entered in insertion mode only; there
is no overwrite mode.

Deleting text

If you make a mistake while entering text, delete
the mistake with the following keys:
BS Deletes the character before (to
the left of) the cursor.
DEL Deletes the character after the
cursor.
DEL Deletes the entire line that the
cursor is on.
NEW ENTRY Clears current field (except in
Notes, Documents and Out-
lines).
or . In either case, the
107
3