Fitting - Festo CPX DE Series Manual

1. Pneumatic interfaces
1.2

Fitting

1−8
Warning
Sudden unexpected movement of the connected actuators
and uncontrolled movements of loose tubing can cause
injury to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating and load voltage supplies.
The CPX terminal must first be dismantled before it can be
extended or converted, or when a pneumatic interface must
be replaced. Instructions on this can be found in the CPX
system manual.
Instructions on extending or converting the pneumatic
modules can be found in the appropriate pneumatics manual.
For Midi/Maxi, CPA or ISO pneumatic interfaces:
The setting of the DIL switches for configuring the pneumatics
(valves used) can be set on the CPX terminal without the need
to disamantle the terminal.
Festo P.BE−CPX−EA−E N en 05602d