Fitting - Festo CP-E08-M12-CL Manual

2. Input modules type CP−E08−M...−CL and CP−E16−KL−CL
2.2

Fitting

Fitting onto a wall
1
Input module
type CP−E08−M12−CL
2
Input module
type CP−E08−M8−CL
3
Input module
type CP−E16−KL−CL
Fig. 2/4: Fitting dimensions CP−E...−CL
Festo P.BE−CPEA−CL−EN en 0404NH
The input modules are intended for fitting onto a wall or onto
profiles. Take into account the following dimensions and
weights:
Type
CP−E08−M12−CL
CP−E08−M8−CL
CP−E16−KL−CL
Tab. 2/2: Dimensions of the input module
The following diagram shows the dimensions for the holes of
screw size M4. Always fasten each module with 2 screws and
a locking disc.
Tightening torque of the fastening screws: 2 ± 0.5 Nm.
75 + 0,5mm
Tip:
The position of the fastening screws on clipped−in type plates
is marked with the symbol
Dimensions
approx. 151 x 30 x 34.5 mm
approx. 151 x 30 x 34.5 mm
approx. 151 x 30 x 34.5 mm
ca. 151 mm
141 + 0,5mm
.
Weight
3
approx. 165 g
3
approx. 190 g
3
approx. 145 g
1
2
3
2−7