Removing The Feed Motor Unit; Delivery Reversing Roller (Upper) - Canon DADF-M1 Service Manual

Chapter 3
[2]
[1]
[4]
[1]
[3]
F-3-65
3.4.7.5 Removing the Feed
Motor Unit
1) Loosen the 2 screws [1], and move down the feed
motor [2]; then, tighten the 2 screws you have
loosened [1].
[1]
F-3-66
When mounting it, be sure to loosen the screws [1]
and move the feed motor [2] back into its initial
position.
2) Remove the 4 screws [1], and disconnect the
3-18
[3]
[1]
[2]
0005-0409
[2]
[1]
connector [2]; then, detach the feed motor unit [3].
[1] [3]
F-3-67
When mounting it, be sure that the timing belt [1]
is properly attached to the pulley [2].
[1]
F-3-68
3.4.8 Delivery Reversing Roller
(upper)
3.4.8.1 Removing the Front
Cover
1) Remove the 3 screws [1], and detach the front cover
[2] by moving it in the direction of the arrow.
[2] [1]
[2]
0003-7081