Delivery Reversing Roller (Upper); Before Removing The Delivery Reversal (Upper); Removing The Delivery Reversal (Upper); Read Roller 1 - Canon DADF-M1 Service Manual

3.4.8 Delivery Reversing Roller (upper)

3.4.8.1 Before Removing the Delivery Reversal (upper)

1) Remove the front cover. (page 3-1)Reference[Removing the Front Cov-
er]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]

3.4.8.2 Removing the Delivery Reversal (upper)

1) Remove the delivery reversal motor unit [2].
- 2 screws [1]
[2]
2) Remove the drive unit [2].
- 4 screws [1]
Be sure to free the harness from the wire saddle [3]. When mounting it, be
sure to route the harness through the wire saddle [3].
After mounting it, check to make sure that the arm [1] of the pickup clutch
is above the bin [2].
[1]
[1]
F-3-48
[1] [2]
[3]
[1]
F-3-49
[2]
F-3-50
3) Remove the E-ring [1] and the bushing [2].
0017-6528
0017-6531
4) Remove the E-ring [1], gear [2], and bushing [3].
5) Remove the delivery reversal upper roller [1].

3.4.9 Read Roller 1

3.4.9.1 Before Removing the Feed Motor 1

1) Remove the front cover. (page 3-1)Reference[Removing the Front Cov-
er]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3) Remove the feeder cover. (page 3-2)Reference[Removing the Feeder
Cover]

3.4.9.2 Removing the Read Roller 1

1) Remove the harness guide [3].
- 1 screw [1]
- 3 connectors [2]
[1]
[2]
F-3-51
[1] [2] [3]
F-3-52
[1]
F-3-53
Chapter 3
0017-6538
0017-6540
3-9