Stack Delivery Operation - Canon Inner Finisher-K1 Service Manual

5 sheets are delivered in a stack without stapling. The 6th sheet is delivered by itself.
Related service mode
• Adjustment of staple position for paper feed direction in the staple free stapling mode:
SORTER > ADJUST > FR-STP-X
• Adjustment of staple position for front/rear direction in the staple free stapling mode:
SORTER > ADJUST > FR-STP-Y
• Adjustment of staple free pressure:
SORTER > ADJUST > FR-ST-PS
• Setting of the staple position of staple free stapling :
SORTER > OPTION > FR-ST-PO
• Setting of the staple-free stapling in no staple cartridge :
SORTER > OPTION > FR-ST-SW
• Setting of paper dust removal from the stapler at the staple free stapling:
SORTER > FUNCTION > FR-ST-RP
• Clearing of the message related to staple free stapling that is displayed when functions of Finisher are limited:
ORTER > FUNCTION > EMSG-CLR

Stack Delivery Operation

■ Outline
The paper in the processing tray is delivered in stacks using the assist guide and assist claw.
The assist guide supports the trailing edge of the paper stack, and the assist claw pushes out to eject the stack.
The assist guide's home position is detected by the assist HP sensor (PS7).
The assist guide and assist claw are moved to the stack delivery position by the rotating assist motor They are returned to their
home positions by the assist motor (M5) rotating in reverse.
Related error code
• E514-8001: Assist motor error
• E514-0002: Assist motor error
■ Divided Delivery
Normally in non-sort or shift-sort mode, paper aligned and shifted on the processing tray is divided every five sheets and delivered.
If the sixth sheet is the last sheet, the last sheet is included to create a six-sheet stack and delivered.
The following table shows the number of divided delivery sheets depending on the paper type, paper size, and paper weight.
In non-sort mode
Assist Claw
Assist Motor (M5)
32
2. Technical Explanation
Assist Guide
Assist HP Sensor
(PS7)
Assist Claw