Overview; Notice; Personal Computer Requirements; Disclaimer Of Warranty - Panasonic AK-MSU1000G Operating Instructions Manual

Master setup unit
Table of Contents

Advertisement

Overview

This unit is a master setup unit for controlling a studio handy camera (AK-HC5000; sold separately, AK-UC3000/AK-UC4000; sold sep-
arately) and a camera control unit (AK-UCU500/AK-UCU600; sold separately).
Use a dedicated optical fiber multi cable to connect a studio handy camera to a camera control unit and use an MSU cable or IP connection
to connect this unit to the camera control unit.
When IP connections are used, up to 99 camera control units can be controlled.

Notice

Personal computer requirements

For the software supplied with the unit, use a personal computer specified on the following website.
https://pro-av.panasonic.net/

Disclaimer of warranty

IN NO EVENT SHALL Panasonic Connect Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR
REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE
INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED
BY THE DEVICES OF THIRD PARTY;
ANY INCONVENIENCE, DAMAGES OR LOSSES RESULTING FROM ACCIDENTS CAUSED BY AN INADEQUATE
INSTALLATION METHOD OR ANY FACTORS OTHER THAN A DEFECT IN THE PRODUCT ITSELF;
LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE;
ANY DAMAGE OR CLAIMS DUE TO LOSS OR LEAKAGE OF IMAGE DATA OR SETTING DATA SAVED ON THIS UNIT OR ON A
MEMORY CARD OR PERSONAL COMPUTER.

Network security

This unit also has functions which are used when it is connected to a network.
Using the unit when it is connected to a network may possibly give rise to the following.
Leakage or disclosure of information transmitted via this unit
Unauthorized use of this unit by a third person with malicious intent
Interference or stoppage of this unit by a third person with malicious intent
It is your responsibility to take sufficient network security measures such as those described below to protect yourself against the above
risks.
Use this unit in a network secured by a firewall, etc.
If this unit is used in a system with a personal computer connected, make sure that checks for and removal of computer viruses
and malicious programs are implemented regularly.
Also observe the following points.
Do not install the unit in a location where the unit, cables, and other parts may be easily damaged.

User authentication

In order to protect device settings from exposure on the network, when connecting to a network, please enable user authentication to
restrict access as appropriate.
- 16 -
Introduction

Advertisement

Table of Contents
loading

Table of Contents