Setting The Contrast And Brightness Of The Display; Accessing The Values Measured - DeDietrich GSHP 5 MR-E User Manual

6 Settings
6.3

Accessing the Values Measured

38 GSHP
6.2.8

Setting the contrast and brightness of the display

1. Go to the User level by pressing the
2. Select the #SETTING menu by turning the settings button.
3. Confirm the selection by pressing the settings button.
Note
Go back to the previous display by pressing the
4. Select the desired parameter: CONTRAST DISP. or BACK LIGHT
by turning the settings button.
5. Confirm the selection by pressing the settings button.
6. Modify contrast or brightness of the display by turning the settings
button.
7. Confirm the modification by pressing the settings button.
Note
Cancel the input by pressing the
8. Go back to the main display by pressing the
1. Go to the User level by pressing the
2. Select the #MEASURES parameter by turning the settings button.
3. Confirm the selection by pressing the settings button.
Note
Go back to the previous display by pressing the
4. View all of the parameters available by turning the settings button.
5. Go to a full definition of the desired parameter by pressing the set­
tings button.
Note
Cancel the input by pressing the
6. Go back to the main display by pressing the
For more information, see
#MEASURES menu - User Level, page 30
key.
key.
key.
key.
key.
key.
key.
key.
7636860 - v04 - 18012017