Customising A Timer Program - DeDietrich GSHP 5 MR-E User Manual

6 Settings
Fig.28 Selecting a day
0 2 4 6 8 10 12 14
PROG P2 C
Mo Tu We Th Fr
E 1
"Display of the timeprogram.
2 To continuepush on the button"
1
D
2
bar
# F !

% $
AUTO
J I
STD
36 GSHP
16 18 20 22 24
Sa Su
9
<
C002228-B-04
2. Select the #CHOICE TIME PROG. menu by turning the settings but­
ton.
3. Confirm the selection by pressing the settings button.
Note
Go back to the previous display by pressing the
4. Select the circuit for which the timer program is to be activated by
turning the settings button.
5. Confirm the selection by pressing the settings button.
6. Select the predefined timer range by turning the settings button.
7. Confirm the desired time range by pressing the settings button.
Note
Cancel by pressing the
8. Go back to the main display by pressing the
The new time range is highlighted at the top of the display.
For more information, see
#CHOICE TIME PROG. menu - User Level, page 31
6.2.6

Customising a timer program

The #TIME PROGRAM menu is used to customise a timer program and to
choose new time ranges.
1. Go to the User level by pressing the
2. Select the #TIME PROGRAM menu by turning the settings button.
3. Confirm the selection by pressing the settings button.
4. Select the circuit for which the timer program is to be set by turning
the settings button.
5. Confirm the selection by pressing the settings button.
Note
Go back to the previous display by pressing the
6. Select the timer program for the circuit selected by turning the set­
tings button.
Note
Cancel the input by pressing the
7. Confirm the selection by pressing the settings button.
8. Choose a day by turning the settings button to select or deselect a
day.
key.
key.
key twice.
key.
key.
key.
7636860 - v04 - 18012017