Calibrating The Sensors - DeDietrich GSHP 5 MR-E User Manual

Fig.29 Selecting/deselecting a day
0 2 4 6 8 10 12 14
PROG P2 C
Mo Tu We Th Fr
E 1
"Select the days to
2 program"
1
D
2
bar
F
#  !
% $
AUTO
J I
STD
Fig.30 Selecting/deselecting the timer
range
0 2 4 6 8 10 12 14
PROG P2 C
Mo Tu We Th Fr
E 1
Set the time program.
2
1
D
2
bar
# F !

% $
AUTO
J I
STD
Fig.31 Repeating selection/deselection
0 2 4 6 8 10 12 14
PROG P2 C
Mo Tu We Th Fr
E 1
"Select the days to
2 program"
1
D
2
bar
# F  !
% $
AUTO
J I
STD
7636860 - v04 - 18012017
16 18 20 22 24
Sa Su
9
<
C002229-C-04
06:00
16 18 20 22 24
06:00
Sa Su
9
<
C002230-E-04
16 18 20 22 24
Sa Su
9
<
C002229-C-04
9. Select or deselect a day by pressing the settings button once or
twice.
The symbol
The symbol
10. Confirm one or more days by pressing the settings button.
The day(s) selected are highlighted.
Note
It is possible to select several days:
Choose another day by placing the cursor over the de­
sired day by turning the settings button to the left.
Select the day when the cursor is over the day desired
by pressing the settings button.
11. Choose a timer range start time by turning the settings button to the
left to situate the cursor.
Note
The cursor flashes.
Setting can be done in 30-minute steps.
12. Select a time range by turning the settings button to the right when
the symbol is displayed.
13. Deselect a timer range by turning the settings button to the right
when the symbol
14. Confirm the start or end time of the time range by pressing the set­
tings button.
The time range selected is highlighted.
15. Repeat the foregoing steps to define the time ranges for the other
days.
16. Go back to the main display by pressing the
The new time range is highlighted at the top of the display.
For more information, see
#TIME PROGRAM menu - User Level, page 31
6.2.7

Calibrating the sensors

1. Go to the User level by pressing the
2. Select the #SETTING menu by turning the settings button.
3. Confirm the selection by pressing the settings button.
Note
Go back to the previous display by pressing the
4. Select the CALIBR.OUT parameter by turning the settings button.
5. Modify the value of the parameter by turning the settings button.
6. Confirm the modification by pressing the settings button.
Note
Cancel the input by pressing the
7. Go back to the main display by pressing the
is displayed for selection.
is displayed for deselection.
is displayed.
key.
key.
6 Settings
key twice.
key.
key.
GSHP 37