Description Of Status Icons; Description Of The Home Screen; Description Of The Zone Display - DeDietrich ALEZIO S User Manual

4 Description of the product
Fig.5
5
1 2
Fig.6
1
2
4
18 AWHP MIV-S
4
MW-1001546-2
3
4.3.3
Tab.14
4.3.4
If the control panel is in standby, turn the selection button to access the
home screen.
3
MW-3001019-3
4.3.5
From the home screen, turn the selection button to access the screens for
the various zones within your installation.
1 Temperature measured by the outdoor temperature sensor
2 Day and time
3 Hydraulic pressure in the installation
4 General status of the appliance
5 Icons indicating the appliance status

Description of status icons

Icons indicating the appliance status
Icons Description
Automatic switch from heating mode to cooling mode
Steady symbol: heating active
Flashing symbol: heating in progress
Steady symbol: cooling active
Flashing symbol: cooling in progress
Steady symbol: domestic hot water available
Flashing symbol: domestic hot water production in progress
Frost protection mode activated
Summer mode activated. No heating possible. Cooling and
domestic hot water production only.
Error detected
The heat pump compressor is running.
The electrical back-up is running.
Operating test mode activated
Installer level activated

Description of the home screen

1 Symbol for the appliance and circuit flow temperature
2 Hydraulic pressure
3 Temperature measured by the outdoor temperature sensor
4 Status of the appliance

Description of the Zone display

7748711 - v03 - 08062020