Table of Contents
Advertisement
6.2.8
Setting the contrast and brightness of the display
6.3
Accessing the measured values
7
Maintenance
7.1
General
7611407 - v07 - 14022022
2. Select the #SETTING menu by turning the settings button.
3. Confirm the selection by pressing the settings button.
Important
Go back to the previous display by pressing the
4. Select the CALIBR.OUT parameter by turning the settings button.
5. Modify the value of the parameter by turning the settings button.
6. Confirm the modification by pressing the settings button.
Important
Cancel the input by pressing the
7. Go back to the main display by pressing the
1. Go to the User level by pressing the
2. Select the #SETTING menu by turning the settings button.
3. Confirm the selection by pressing the settings button.
Important
Go back to the previous display by pressing the
4. Select the desired parameter: CONTRAST DISP. or BACK LIGHT by
turning the settings button.
5. Confirm the selection by pressing the settings button.
6. Modify contrast or brightness of the display by turning the settings
button.
7. Confirm the modification by pressing the settings button.
Important
Cancel the input by pressing the
8. Go back to the main display by pressing the
1. Go to the User level by pressing the
2. Select the #MEASURES parameter by turning the settings button.
3. Confirm the selection by pressing the settings button.
Important
Go back to the previous display by pressing the
4. View all of the parameters available by turning the settings button.
5. Go to a full definition of the desired parameter by pressing the settings
button.
Important
Cancel the input by pressing the
6. Go back to the main display by pressing the
See also
#MEASURES menu - User Level, page 24
Maintenance operations are important for the following reasons:
To guarantee optimum performance.
To extend the life of the equipment.
7 Maintenance
key.
key.
key.
key.
key.
key.
key.
key.
key.
key.
key.
GSHP
31
Advertisement
Table of Contents
