Changing The Temperature Of An Activity; Room Temperature For A Zone; Selecting The Operating Mode; Activating And Configuring A Timer Programme For Heating - DeDietrich HPI S Series User Manual

4 Operation
4.7.3

Changing the temperature of an activity

4.8

Room temperature for a zone

4.8.1

Selecting the operating mode

Tab.18
Mode
Scheduling
Manual
Short temperature change
Holiday
Antifrost
4.8.2

Activating and configuring a timer programme for heating

18 MIT-S
3. Select Set Heating Activity Names or Set Cooling Activity Names.
4. Select the activity you want to change.
5. Change the name of the activity (10 characters max.).
The temperatures for the different activities are factory-set as shown in the
appendix. If you desire, you can personalise the temperatures for these
activities for all of the zones in your installation. These activities are used
in the timer programmes.
1. Select the icon for the zone to be programmed,
2. Select Set Heating Activity Temperatures, either for heating or for
cooling.
Information on the selected menu is given in the lower part of the
screen.
3. Select the activity you want to change.
4. Modify the temperature for the activity.
5. Enter the chosen temperature in the table provided at the back of the
manual.
To set the room temperature for the different living zones, you can choose
between five operating modes. We recommend the Scheduling operating
mode which enables the room temperature to be modulated according to
your needs and to optimise your energy consumption.
1. Select the icon for the affected zone,
Off
2. Select the desired operating mode:
Description
The room temperature is modulated according to the timer programme chosen.
Recommended mode.
The room temperature is constant.
The room temperature is forced for a defined period.
The room temperature is reduced during an absence period to save energy.
The installation and equipment are protected against frost during the winter peri­
od.
A timer programme can be used to vary the room temperature in a living
zone depending on activities during the day. This can be programmed for
each day of the week.
1. Select the icon for the zone to be programmed,
Off
Information on the current operating mode is given in the upper part
of the screen.
2. To activate the timer programming or to change the timer programme,
select Scheduling.
3. Select the timer programme to be activated.
Information on the active timer programme is given in the upper part
of the screen.
, for example.
, for example.
, for example.
7684505 - v04 - 10022022