Changing The Temperature Of An Activity; Room Temperature For A Zone; Selecting The Operating Mode; Activating And Configuring A Timer Programme For Heating - DeDietrich ALEZIO S V200 User Manual

Reversible air/water split inverter heat pump
Hide thumbs Also See for ALEZIO S V200:
Table of Contents

Advertisement

5 Operation
Fig.22
MW-6000861-02
Fig.23
MW-6000879-1
5.6

Room temperature for a zone

Fig.24
MW-6000861-02
Fig.25
MW-6000874-1
Tab.21
Operating mode
Programming
Manual
Temporary temperature change
Holiday
Frost protection
24
MIV-S V200
5.5.3
The activities are used in the timer programming to define the temperature
required at different times of the day. You can customise the temperature
associated with each activity for each zone within your installation.
1. From the home screen, access the screen for the relevant zone by
turning the
2. Press the
3. Select one of the following menus:
Set heating temperatures to change the temperature for the
activities used for programming the heating mode
Set cooling temperatures to change the temperature for the
activities used for programming the cooling mode
4. Select the activity you want to change.
5. Modify the temperature for the activity.
5.6.1
To set the room temperature for the different living zones, you can choose
between five operating modes. We recommend the Programming
operating mode which enables the room temperature to be modulated
according to your needs and optimises your energy consumption.
1. From the home screen, access the screen for the relevant zone by
turning the
2. Press the
3. Select Operating mode.
4. Select the desired operating mode:
Description
The room temperature is regulated according to the selected timer programme.
Recommended mode.
The room temperature is constant.
The room temperature is forced for a defined period.
The room temperature is reduced during an absence period to save energy.
The selected zone within the installation is protected from frost in winter.
5.6.2
A timer programme can be used to vary the room temperature in a living
zone depending on activities during the day. This can be programmed for
each day of the week.

Changing the temperature of an activity

selector.
selector.

Selecting the operating mode

selector.
selector.

Activating and configuring a timer programme for heating

7748661 - v03 - 08062020

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents