Activating Manual Forcing For Heating; Setting The Timer Program - DeDietrich AWHP 4MR–EMC 24/28 MI HYBRIDE User Manual

6 Settings
Fig.43 Accessing the menus
MW-5000009-4
Fig.44 Accessing Manual Forcing
Fig.45 Setting the set point
Fig.46 Accessing the COUNTERS / TIME
PROG/ CLOCK/ menusPROG
COOL
40

6.2.5 Activating Manual Forcing for heating

Caution
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Access the menus by pressing the two keys on the right simultane­
ously.
2. Access Manual Forcing by pressing the
pressing the
Note
Manual Forcing is available only when the
MW-5000010-3
3. Set the value of the heating water temperature set point by pressing
4. Exit manual mode and go back to the main display by pressing the

To force domestic hot water production, it is necessary to select the
DP200 parameter available in the User menu.
MW-5000042-3

6.2.6 Setting the timer program

1. Access the COUNTERS/ TIME PROG / CLOCK/ menus PROG
COOL
Note
The PROG COOL parameter dedicated to the timer program for
the cooling function is displayed only if available.
2. Select the TIME PROG sub-menu dedicated to the program dedica­
ted to heating and domestic hot water production by pressing the
or
MW-5000044-3
key.
or key. Confirm by pressing the
key.
key. Confirm by pressing the
or key. Confirm by
icon flashes.
key.
key.
7611444 - v02 - 11122015