Display Appendix
AIR GAP VS. LIQUID LEVEL (HOW TO SELECT THE DISPLAY SETTING)
The display can be made to display either the height of liquid in the tank (LIQUID mode) or the amount of air in
the tank (AIR mode). This function does not influence the current output, just the display on the sensor.
1. In TOP-LEVEL MENU mode, select DISPLAY.
2. Select LIQUID or AIR.
a. Press and hold OK on the selected setting for
2 seconds then release.
b. To cancel DISPLAY, Select EXIT.
3. Select EXIT to return to TOP-LEVEL MENU.
Liquid Mode
MN310140 Rev A3
Air Mode
Section Eight
45
|