Wiring
WIRING DIAGRAM - SAMPLE
®
WIRING ECHOPOD
®
Once EchoPod
has been configured; follow the Wiring Diagram provided by the WebCal
wiring diagram is shown above. Flowline recommends using a qualified licensed electrician to wire EchoPod
with your application's components.
Configure your EchoPod
diagram. Each configuration will have its own unique diagram. The diagram shown above is only a
sample and should not be used as a wiring diagram.
The analog output of the EchoPod
this feature is to connect a positive supply to the (+) input and to sense the current flow out of the (-)
output.
|
32
Diagram will change based upon
the sensor's configuration, use
WebCal
diagram.
®
®
with WebCal
and use the wiring diagram button to view the appropriate
®
is a loop powered 4-20 mA control circuit. The typical way to use
Sample Wiring Diagram
®
to view appropriate wiring
Step Six
®
software. A typical
®
MN310140 Rev A3