G Touch Panel; Touch Panel; Using The Touch Panel; Selection Of Function - Sharp AR-C260 Operation Manual

Touch panel

Using the touch panel

[Example 1]
JOB QUEUE SETS / PRO
COPY 003 / 00
SHARP001 003 / 00
010 / 00
0666211221
Beep
tone
[Example 2]
1/13
COMPLETE
The confirmation beeps can be disabled by a key
operator program. (See page 8 of the key
operator's guide.)
The touch panel screens shown in this manual are
printed images, and may appear different from the
actual screens.
Items on the touch panel
are easily selectable by
touching the key associ-
ated with the item with a
finger. Selection of an
item will be
accompanied with a
beep tone to confirm the
item was selected. Also,
the key area for the item
will be highlighted for
visual confirmation.
Keys which are grayed
out on any screen are
not selectable. If a
grayed out key is
touched, a double beep
will be sounded.
PART NAMES AND FUNCTIONS

Selection of function

[Example 1]
CANCEL OK
LEFT RIGHT
D
BINDING BINDING
[Example 2]
DUAL PAGE
COPY
COLOR
ADJUSTMENTS
Copier feature
G Dual page copy
G Centering
G Transparency inserts
G Mirror image
G 11"x17" (A3) Full-bleed
[Example 3]
READY TO COPY.
SPECIAL
2-SIDED COPY
A4
DUPLEX
OUTPUT
A3
B4
Items which are
highlighted at the time a
screen appears are
already selected and will
be registered to function if
the [OK] key is touched.
When the machine is
used in the copy mode,
the functions shown in
the table below can only
be set or canceled on
the special feature
screen by alternate
touches of the function
keys on the panel.
When the machine is
used in the copy mode
O
and a special feature is
P selected,
corresponding icon
representing the feature
will appear on the touch
key and on the main
screen of the mode
selected. If this icon is
touched, the setting
screen of the function (or
a menu screen) will
appear, allowing the
settings to be checked
or adjusted and the
function to be canceled
easily.
1-9
1
a