Multi Shot - Sharp AR-C260 Operation Manual

1 Touch the [PHOTO REPEAT] key on the
IMAGE EDIT menu screen.
R
PHOTO REPEAT
GE
EXTRA SIZE PAMP
NT
2 Touch the key for the desired combination
of original type and paper size.
IMAGE EDIT
PHOTO REPEAT
ORIGINAL SIZE
E/L SIZE POST CARD
148x105mm
3 x 5"
When any one of the keys is touched, the photo
repeat icon ( , etc.) will appear at the upper left of
the screen to indicate that the function is turned on.
If the key for the desired combination doesn't
appear, touch the
then touch the desired repeat type key (8-1/2" x
11" (A4) or 11" x 17" (A3)).
When making repeat copies of an original size (to
2-1/8" x 3-5/8" (57 x 100 mm)), only 8-1/2" x 11"
(A4) can be selected for the paper size.
3 Touch the [OK] key (inside [OK] key) on
the PHOTO REPEAT setting screen.
Return to the IMAGE EDIT menu screen.

Multi shot

The multi shot function is used to copy up to four originals, collectively in a specified order, per sheet of copy paper
in any one of four layout patterns.
[Example] Copying seven originals using the 4 in 1 MULTI SHOT selection in a layout pattern starting from the upper
left to lower right.
One-sided copies
from one-sided
originals
One-sided copies
from two-sided
originals
The PHOTO REPEAT
setting screen will
appear.
MU
OK
CANCEL OK
1/5
REPEAT TYPE
A4/8½x11 A3/11x17
4 8
or key to scroll, and
Copies
4 Touch the [OK] key on the IMAGE EDIT
menu screen.
Return to the SPECIAL MODES screen.
5 Touch the [OK] key on the SPECIAL
MODES screen.
Return to the main screen of copy mode.
About the steps that follow
See pages 5-7 through 5-8.
NOTES
G Be sure to place the original on the document
glass, The reversing automatic document feeder
cannot be used for this function.
G Place ~2-1/2" x 4" (70 x 100mm), ~2-1/2" x 2-1/2"
(65 x 70mm) and ~2-1/8" x 3-5/8" (57 x 100mm)
originals as shown below.
Centering scale
Placing a
~2 ½" x 4"
(70 x 100mm)
1 8 / 5 8 /
or ~2 " x 3 "
(57 x 100mm)
original
To cancel the PHOTO REPEAT function, select the
PHOTO REPEAT function again and touch the
[CANCEL] key (step 2).
G When using the multi shot function, place the
originals, select the desired paper size, and
select the copying mode before selecting the
multi shot function on the special modes screen.
G When using the multi shot function, the
appropriate copy ratio will be automatically set
based on the original size, paper size, and the
number of originals to be copied onto one sheet.
The minimum reduction ratio is 25%. Depending
on the original size, paper size, and the number of
originals to be copied onto one sheet, the
appropriate copy ratio may be from 26% to 44%, or
it may be smaller than 25%. If smaller than 25%,
portions of original images may not be copied.
IMAGE EDIT MENU
Centering scale
Placing a
~2 ½" x 2 ½"
(65 x 70mm)
original
6-19
6