G Touch Panel (Main Screen Of Copy Mode); Touch Panel (Main Screen Of Copy Mode); Special Modes; Functions - Sharp AR-C260 Operation Manual

PART NAMES AND FUNCTIONS (The Reversing Automatic Document Feeder)

Touch Panel (main screen of copy mode)

The main screen of copy mode shows messages and keys necessary for copying and settings that can be selected.
Touch a key to make a selection. The main screen of the copy mode will be displayed when the [COPY] key is
pressed.*
READY TO COPY.

SPECIAL MODES

2-SIDED COPY
OUTPUT
Message display
Basic status messages are displayed here.
[INTERRUPT] key display area
When interrupt copy
[INTERRUPT] key will be displayed here. When an
interrupt copy job is being run, a [CANCEL] key will
be displayed here to be used for canceling the
interrupt copy job.
Copy quantity display
Displays the selected number of copies before the
[START] key is pressed or the number of remaining
copies after the [START] key is pressed. A single
copy can be made when "0" displayed.
[2-SIDED COPY] key (page 5-6, 5-9)
Touch to display the duplex copy mode setting
screen.
[OUTPUT] key (page 5-3, 5-8)
Touch to select sort, group, and staple sort.
[SPECIAL MODES] key (page 6-2)
Touch to display the special modes selection
screen.
Original feed display
This lights steadily when an original is placed on
the original table of the reversing automatic
document feeder. When "Stream feeding mode" in
the key operator programs is turned on, the display
blinks during the waiting period (about 5 seconds)
for placement of the next original. (See page 10 of
the key operator's guide.)
4-4
INTERRUPT
AUTO
ORIGINAL 8½x11
EXPOSURE
PLAIN
AUTO
5½x8½
PAPER SELECT
8½x11
100
DUPLEX
8½x11
COPY RATIO
11x17
is available, the
* Except
settings screen is displayed.
The screen at left shows the
0
machine with the reversing
automatic document feeder,
the duplex module/2 x 500
sheet paper drawer, and the
duplex
8½x11
installed.
The image will vary depending
%
on the equipment installed.
Paper size display
The display shows the location of the paper trays,
the size of the paper in the trays and the
approximate amount of paper loaded in each tray.
The approximate amount of paper in a tray is
indicated by .
Original size display
Displays the original size only when an original is
placed for copying.
Exposure display
Displays the icon of the selected resolution and the
exposure scale.
[EXPOSURE] key (page 5-10)
Use this key to adjust the copy exposure.
Paper select display
Displays the selected paper size. When the auto
paper select mode has been selected, "AUTO" will
be displayed.
[PAPER SELECT] key (page 5-2, 5-7)
Use this key to select the paper size.
Copy ratio display
Displays the selected copy ratio.
[COPY RATIO] key (page 5-13)
Use this key to select the copy ratio.
when the custom
bypass/inverter unit