G Margin Shift; Margin Shift - Sharp AR-C260 Operation Manual

SPECIAL MODES

Margin shift

The margin shift function will automatically shift the text or image on the copy paper approximately 1/2" (10 mm) in
its initial setting.
One-sided copying
Image shifted
to the right
Original
Margin
Two-sided copying
Original
Image shifted
to the right
Or
Margin
1 Touch the [MARGIN SHIFT] key on the
SPECIAL MODES screen.
MARGIN SHIFT
TRANSPARENCY
INSERTS
2 Select the shift direction.
RIGHT LEFT
6-4
Image shifted
to the left
Margin
Image shifted
to the left
Margin
The margin shift setting
screen will appear.
The margin shift icon
( ) will also appear in
the upper left of the
screen to indicate that
the function is turned on.
Touch a shift direction
key to select right or left.
The selected key will be
highlighted.
G The shift direction can be selected from right or left shift as
shown in the illustration.
3 Set the shift amount as needed and touch
the [OK] key.
OK
CANCEL OK
SIDE 1 SIDE 2
(0 1) (0 1)
1/2 1/2
inch inch
500 sheet paper drawer and duplex bypass/
inverter unit are not installed, the margin shift
setting for back-side copies will not be displayed.
Touch the [OK] key on the SPECIAL
4
MODES screen.
Return to the main screen of copy mode.
About the steps that follow
If a reversing automatic document feeder is
being used, see pages 5-2 through 5-6. If the
document glass is being used, see pages 5-7
through 5-9.
To cancel the margin shift function, touch the
[CANCEL] key on the margin shift setting screen.
Use the and the
keys to set the shift
amount. The shift
amount can be set from
0" to 1" in 1/8"
increments.
If a duplex module/2 x