G Misfeed In The Stand/1 X 500 Sheet Paper Drawer; G Misfeed In The Stand/3 X 500 Sheet Paper Drawer; Misfeed In The Paper Feed Area - Sharp AR-C260 Operation Manual

Misfeed in the paper feed area

NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
Misfeed in the 500 sheet paper drawer
1 Open the upper side cover.
NOTE
If paper is loaded in the bypass tray, temporarily
remove the paper and close the bypass tray before
opening the side cover.
2 Remove the misfed paper.
NOTE
The misfeed may have occurred inside the machine.
Check carefully and remove it.
3 If misfed paper is not found in step 2, pull
out paper tray 1 and remove the misfed
paper.
Grasp the finger hold
and gently open the
cover.
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
4 Gently close the paper tray.
5 Gently close the upper side cover.
MISFEED REMOVAL
Push the tray firmly all
the way into the
machine.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.
2-19
2