11" X 17" (A3) Full-Bleed - Sharp AR-C260 Operation Manual

11" x 17" (A3) Full-bleed

In other copy modes, image loss will occur along the copy edges. When the 11" x 17" (A3) FULL-BLEED function is
used, the full image of an 11" x 17" (A3) size original will be copied onto 12" x 18" (A3W) size copy paper.
Reduction or enlargement cannot be selected with this function. If reduction or enlargement has been selected, the
copy ratio will be reset to 100% when this function is selected.
Automatic two-sided copying is not possible.
Original (11" x 17" (A3)) size
1 Touch the [FULL-BLEED] key on the
IMAGE EDIT menu screen.
SINGLE COLOR
MULT
FULL-BLEED
ENLA
2 Touch the [OK] key on the IMAGE EDIT
menu screen.
Return to the SPECIAL MODES screen.
3 Touch the [OK] key on the SPECIAL
MODES screen.
Return to the main screen of copy mode.
4 Load 12" x 18" (A3W) copy paper into the
bypass tray.
The [FULL-BLEED] key
will be highlighted to
indicate that the function
is turned on, and the full-
bleed icon ( ) will
appear in the upper left
of the screen.
Adjust the bypass guide
to 12" x 18" width before
loading the paper.
Remove any paper
remaining in the tray.
Pull out the tray
extension and wire
extension. (See page 2-
4)
Copy (12" x 18" (A3W)) size
5 Touch the [PAPER SELECT] key on the
touch panel and then select the paper type
in the bypass tray.
READY TO COPY.
1. 8½x11 PLAIN
2. 8½x14 RECYCLED
3. 11x17 COLOR
4. 8½x11R PLAIN
Touch the [PLAIN] key or the [HEAVY PAPER]
key.
About the steps that follow
If the reversing automatic document feeder is
being used, see pages 5-2 through 5-5. If the
document glass is being used, see pages 5-7
and 5-8.
In either cases, extend the copy receptacle and
then begin copying.
To cancel the 11 x 17 (A3) FULL-BLEED function,
touch the [FULL-BLEED] key again on the IMAGE
EDIT menu screen (step 1).
IMAGE EDIT MENU
0
INTERRUPT
12x18
AUTO
EXPOSURE
PLAIN
HEAVY PAPER
PAPER SELECT
TRANSPARENCY
100 %
COPY RATIO
ENVELOPE
6-21
6