Touch Panel - Sharp DX-2500N Operation Manual

TOUCH PANEL

This section explains how to use the touch panel.
Messages and keys are displayed in the touch panel display to enable various operations to be performed.
• To enter text, see "ENTERING
• Press the [JOB STATUS] key (
• For details about the [HOME] key (
• Press the [SYSTEM SETTINGS] key (
and procedures for using the system settings, see
SETTINGS".
When you operate the touch panel, do not accidentally touch areas in the touch panel that are not necessary for the intended
operations.
If touched, the machine may malfunction.
Using the touch panel display
Example 1
(1)
COPY IMAGE SEND
Job status screen.
Print Job Scan to
Job Queue Sets / Progress
1 Copy
2 Copy
(2)
3 Computer01
4 0312345678
(1) Mode select keys
Use these keys to switch between copy, image send, and document filing modes*.
* The productivity kit is required. If the productivity kit is not installed, the mode used will be print mode.
(2) Settings for each function are easily selected and cancelled by touching the keys on the screen with your finger.
When an item is selected, a beep will sound and the item will be highlighted to confirm the selection.
(3) Keys that are greyed out cannot be selected.
If you touch a key that cannot be selected, a double beep will sound.
TEXT" (page 1-71).
) to display the job status screen.
), see "HOME
) to display the system settings menu screen. For information on the screens
DOCUMENT
FILING
Fax Job
Status
Spool
020 / 001 Copying
Job Queue
Waiting
002 / 000 1 Complete
1
Beep
Waiting
002 / 000
Tone
Waiting
001 / 000
Detail
Priority
Stop/Delete
BEFORE USING THE MACHINE
[JOB STATUS] key ( )
[HOME] key ( )
[SYSTEM SETTINGS] key (
Display
SCREEN" (page 1-22).
"Common Operation Methods" (page 7-4) in "7. SYSTEM
(3)
1-10
)
Contents